Minis In Maxis

Back when I went shopping for the Goodwill Fashion Challenge, I also snatched up this top for a buck:
It was hanging on the end of a rack and the stripes caught my eye (what’s new?)  It was an XL so my mind immediately went to turning it into two maxi dresses for the girls.  And so I did.  To do so, I first folded it in half. 
And then I cut it in half along the fold…no measuring here folks.

That gave me two pieces of the shirt.  Last, I folded each piece in half, right sides together, with the cut edges touching and serged the two cut ends of each piece together to make two dresses (sewing them together would work perfect too).

Side Note:  If you buy an extra small or small top like this, you can probably get away without any sewing (besides maybe hemming or even just cutting off extra length if it’s a knit material like mine) if you’re looking to make a dress for one toddler.
 
And so that I didn’t age my kids 20 years, I cut two thick strips off the bottom of an old tee, folded each strip in half but forming a ‘v’, and sewed the base of the v to the top of each dress.
Insta-halter.

     
I took them outside with the DSLR to grab some quick after shots and it wasn’t until after I put the good camera away that they gave me stuff to work with.

This is unprompted, iPhone 4S, quality stuff:
 
They’ve been doing this (hilarious) thing lately where they run at each other with arms wide open yelling something in Spanish and crash into a loving embrace…and then die laughing at each other.   (I’m guessing Diego and/or Dora have something to do with it.)
 
Over and over they do it.  We were in JoAnn Fabrics two days ago and while I was waiting to get some fabric cut, they were putting on a show doing this down the main aisle.  I didn’t know if I should tell them to stop running or let it play on to the amusement of everyone around.  I let it go.  Dem girls I tell ya.  :)

Back to their garb though, I didn’t stop with the maxis…
…more on their new diy kimonos later.  (Not only are they diy but they can easily be made with nary a sewing machine in sight!  You won’t want to miss this one!)

And it just so happens that…
Yep.  Birthday present from Grandma this past year.  Totally random but I couldn’t resist.  ;)

Have a fantastic Monday! 

 

If you like it, then you shouldda putta a pin in it!  :)

Crew Cut

I’m not a fan of crew neck shirts.  They feel stuffy to me.  I’m all about v-necks and round necks and square necks and every other neck (besides plunging maybe because, for one, my kids tend to grab onto my shirt during times of slight duress and OOPS!  HELLOO!)  But, I do own a few crews.  In particular, there’s this hand-me-down:This is the only picture I have wearing it and you can’t even see the crew neck so it should be tossed in the irrelevant category but I’ll humor myself again and post it.  This was when I was pregnant with Sebastian.  I laughed out loud to myself when I pulled it over the bump though because it seemed to add a little vavoom to Audrey’s chest area that wasn’t there before…so I took a picture.  :D

Here’s what it really looks like (except in white):[image via Tradesy]

And why am I even worrying about posting a before picture?  You all know what a crew neck tee looks like!  Silly me!

So anywho, one day post-pregnancy, I decided I wanted to wear that shirt again but didn’t want to deal with the stuffy crew neck, so I just cut it off (and didn’t take a single in-process picture…boo). 

I cut right around the existing neck; cutting off the ribbing. 

Cutting around the existing neck helped me make sure I wasn’t getting a wonky cut.  After I had done that, I decided I wanted it a tad wider so I cut another half inch off; following the circle I had just cut.  Since the tee I cut was jersey, there was no hemming needed!

Freedom!

Here’s how I’m wearing it today:
 
[My mirror lied when it told me these ancient trouser jeans are still good to wear.  Looking a little shoddy these days…]

And, per J’s inspiration, I threw this altered blazer over it.

Oh, hold on, my super-sleek, company-supplied phone is going off…

*

Oh wait, that’s just a toddler cry in the arena I call mi casa.

Gotta run.

Bamboozled

Our parish had a yard sale fundraiser a couple of weeks ago to raise money for this summer’s mission trip to Ecuador and we helped plan the event.  Everything in the sale was donated by parishioners, including these two ladies:

Although sturdy, they looked a little sad – the fabric on the seats was worn and the bamboo was discolored and stained in many spots.  So, I did what anyone with a tooth for a project did, I snatched them up and told them I’d make them over so that they could sell them for much more than the $5 a piece they were asking.  :D

So I did.

And here’s how.

First I removed the seats.  You can see they were just attached by four screws, screwed in through metal brackets at the four corners under the seat.


Then I gave the bamboo a quick vacuum with a bristled vacuum attachment and scrubbed them down with some soap and water - I used a wet toothbrush to clean out crevices and to remove a little grime and a damp washcloth to clean the rest.

Once clean, I took them outside to be painted.  I used Rustoleum spray paint in white and to make sure I covered every inch of the chairs that would be seen, I first painted the chairs upside down.  This enable me to get underneath the curves on the backrest and places under the chair that might be seen from above.
  

I covered most of the underside of the chair but I didn’t waste paint with parts that definitely wouldn’t be seen.  Also, I sprayed two coats for good coverage – I painted the second coat about 30 minutes after the first.

After the underside was dry, I flipped the chairs over and sprayed them standing upright.


Here’s where all that painting got me:
 

Next came the seats.


Lots of staples had to be removed in order to freshen these babies up.  To remove them, I used a small flathead screwdriver to pry them up and a needle-nose pliers to pull them out.


First I started by removing the black backing.


Then I removed the piping.
 
I removed the old piping material from the piping itself because the original intention was to redo the piping with the new fabric.  But, in the end, it turned out the chairs didn’t really need the piping…which was good because I didn’t have a ton of time to finish these and I had never made my own piping before.

After I started removing the actual seat material on one of the chairs, I realized that it wasn’t foam underneath but a sort of loose fiber.  We debated on just buying new foam to fit to the seats but then ditched that for the easier route – simply putting the new fabric over the old.  The old fabric wasn’t gross, just worn and faded, so it worked out well to skip a few steps! 

To make sure the new geometric fabric (a mustard-colored curtain panel we purchased at Kohl’s) was straight, I first laid the seat right on top of the fabric, which was upside down so that the wrong side of the fabric was facing the top of the seat.  Then I eyeballed it, making sure it was right in the center of the design.
 
Then, while I wrapped the fabric around to the underside, Anthony stapled.  We did the front (straight edge) of the seat first followed by a few staples at the back center.  Then we did the sides and front corners.  Last we did the rest of the back; around the curved corners.  I wish we had more hands to take pictures because, while it seems fairly easy, there’s a lot of pulling and folding involved to make sure there are no folds along the sides of the seat.  These seats were a little more difficult since they were rounded at the back; a squared seat (like this one) would’ve been a lot easier.

We did one seat one night and the next seat a couple of nights later.  While I love the outcomes of recovering seats, the process isn’t the most fun past time so you can imagine how glad I was after that last staple was in on the last seat…and then you can imagine my grief when I set both seats on their bamboo counterparts and realized the ikat design on one was opposite the other:
 
This is what happens when you do projects while the kids are awake.  #facepalm #facepalm #facepalm

Out came lots of staples and in went more and finally, we had it right and almost done.  Before our last step, which you’ll see below, I made sure that none of the screw holes were completely covered by layers of fabric, making it really difficult if not impossible to get the seat back on the chairs.  I simply cut around the holes if there was too much fabric over them or cut a small hole in the fabric above the holes if I couldn’t cut around them.  Hopefully that makes sense.  Again, I didn’t take pictures of the underside of the seats once we were finished upholstering them (rookie mistake!) but you can see similar scenarios in this post and this one.

The next and last step was covering the underside of the seats.  Because we opted to cover over the old fabric, some of it was peeking out from under the new on the underside of the seat.  Of course nobody really looks under there but it bothered me.  So, I grabbed some interfacing we had left from covering the bottom of the loveseat, and stapled it on there.

First, I cut out a piece a little larger than the area I wanted covered and centered it over the area, placing two staples in the middle to hold it in place.
  
The interfacing I used was fairly thin and allowed me to see the edge of the fabric underneath so I just grabbed a scissors and cut it to size, making sure I was cutting it so that it overlapped the edge of the fabric.  Then I stapled it in place.
 

Much cleaner.
 

And that’s it!
  

Do you have upholstering chairs under your belt?  My friends Pam and Oscar are in the process of doing their dining room chairs and look how great they’re turning out!  I love the floral fabric they chose!
 

And my friend Natasha did hers too!  So classy, right?


It’s a really simple update anyone can do!  Like I said above, the more square the cushion, the easier but if you can tug and pull, you can tackle any shape!

.           .           .

P.S.  If you live in the Mobile area and are interested in buying these lovely ladies (or even just one…they’d make great desk chairs!), email me at beaninlove@gmail.com

P.P.S.  A huge virtual hug and cheeky kiss to all of you who voted for my outfit for the Goodwill Fashion Challenge!  I got second place – a $100 gift card to Goodwill!  I’m going to pass on a small token of appreciation to one lucky voter so if you voted, keep your eyes peeled because that just might be you!  I’ll pick a winner before the end of the week!  Seriously, thanks again!

Tulip Wreath: Take II

Remember the tulip wreath I made a couple of years ago?  I pulled it out of the attic this spring but didn’t hang it because, hello, bright orange-red door + hot pink floral wreath = clashboombang  But, I had a plan.  I’d go to Hobby Lobby (where I bought the pink tulips), grab the same number of white tulips, pop the pink heads off and replace them with white.  Sounds easy enough, right?  Right.  Only it wasn’t that easy.  Is it ever? 

Why?  Because apparently Hobby Lobby now sells a different brand of tulip stems than they did two years ago so not only were the stems a little thinner this year (boo!) but I had a really hard time getting the pink heads off the old stems without ripping the flowers.  I was so bummed.  So what did I do?  I just made a whole new wreath.

[Don’t worry, our ceiling isn’t actually slanted as it appears in the above picture.  It’s just the curve of the camera lens playing its tricks…I haven’t yet learned how to reign those in!]

I made it a little differently this time though.  The old one held up great but there were a couple of tulips that slipped out while I was moving the wreath because they had become unstuck.  I needed something a little more durable than hot glue.  After a quick brainstorming sesh I came up with the perfect thing; a thing I wasn’t sure existed.  Zip ties!  Those would hold my flowers on!  But, not any zip tie would do.  I needed some really small ones.  After a quick internet search, I found that, not only do mini zip ties exist, they also come in a plethora of colors.  I search the big box stores first (Lowe’s and Home Depot) for the best prices but then stumbled upon this pack of 100, brown mini zip ties on amazon (affiliate link).  They were cheaper than any other mini zip ties I could find and my hope was that they’d blend in with the brown grapevine.  I bought two packs and anxiously awaited their arrival.

They came, my friend Jesse came over with some vino, and we had ourselves a little wreath-making party.

Want to make one of your very own?  Here’s how! 

First, I followed my earlier tutorial by cutting the tulip stems off the bunches so I had a lots of individual stems.

[I used three bunches of tulips, just like last time.  Each bunch had about 11 blooms on it.]

Then, also per my other tutorial,  I stuck tulip stems in and through the wreath, all the way around.  When I had all the tulips in and where I wanted them, I carefully turned the entire wreath over so that the tulips were face-down on the table.
 

Here’s where the zip ties come in.

I attached each piece of stem that was sticking out the backside of the wreath with a zip tie.  I wove the zip tie underneath each tulip stem plus a few of the grapevine twigs closest to it.

Then I zipped it shut, making sure it was nice and tight.  See how well the brown is camouflaged?  I circled it to make sure you wouldn’t miss it.  ;)

After I had zip tied all of the stems to the wreath, I went along and cut the excess plastic off all the zip ties.

The stems of the tulips were sticking a good three to four inches out the back of the wreath so I grabbed a needle-nose pliers and shortened them with the wire cutter at the base of the pliers.

After I was finished zip tying and trimming stems, I plopped a blob of hot glue over each zip tie for extra reinforcement and to ensure all of the stems were stuck and stuck good.  If a hurricane every breathes it’s strongest breaths upon this house (praying that never happens but…), you’ll find this wreath in one piece wherever it lands.  I guarantee it.

We have a screw on our front door in prime position to hold a wreath…I’m guessing that was the previous owners intention when they put it there and left it.  So, all I did to hang the wreath was tie a piece of twine to the back and hook it right up on that screw.

 

And that’s a wrap wreath!

Here’s my friend Jesse’s:

How great does her porch look?!  She not only made the wreath but also whipped up those uber cool planters!

Hannah also sent me a picture of the two wreaths she made using this tutorial and look how great they look!

Her double doors are amazing, no?

And then came more wreaths.  You see, I’ve a had a bunch of floral stems stashed away for projects and decor that I recently took out of hiding to sell and they sat on a resale site without any interest whatsoever.  So, I grabbed a medium-sized, grapevine wreath from Hobby Lobby and these two from a yard sale…

…and turned them into these:

 

My favorite is the pink and white one!  I really want to keep it but then I’d back right into the whole pink and bright red dilemma I just escaped.  Maybe next spring I’ll duplicate it with something more coordinating.

.           .           .

Are you a wreath-maker or a wreath-buyer?  Or maybe you’re just not a wreath person at all which is totally cool.  A lot of people down here in the South hang big monograms on their front doors to mark their territory.  Form and function!  :)