Crew Cut

I’m not a fan of crew neck shirts.  They feel stuffy to me.  I’m all about v-necks and round necks and square necks and every other neck (besides plunging maybe because, for one, my kids tend to grab onto my shirt during times of slight duress and OOPS!  HELLOO!)  But, I do own a few crews.  In particular, there’s this hand-me-down:This is the only picture I have wearing it and you can’t even see the crew neck so it should be tossed in the irrelevant category but I’ll humor myself again and post it.  This was when I was pregnant with Sebastian.  I laughed out loud to myself when I pulled it over the bump though because it seemed to add a little vavoom to Audrey’s chest area that wasn’t there before…so I took a picture.  :D

Here’s what it really looks like (except in white):[image via Tradesy]

And why am I even worrying about posting a before picture?  You all know what a crew neck tee looks like!  Silly me!

So anywho, one day post-pregnancy, I decided I wanted to wear that shirt again but didn’t want to deal with the stuffy crew neck, so I just cut it off (and didn’t take a single in-process picture…boo). 

I cut right around the existing neck; cutting off the ribbing. 

Cutting around the existing neck helped me make sure I wasn’t getting a wonky cut.  After I had done that, I decided I wanted it a tad wider so I cut another half inch off; following the circle I had just cut.  Since the tee I cut was jersey, there was no hemming needed!

Freedom!

Here’s how I’m wearing it today:
 
[My mirror lied when it told me these ancient trouser jeans are still good to wear.  Looking a little shoddy these days…]

And, per J’s inspiration, I threw this altered blazer over it.

Oh, hold on, my super-sleek, company-supplied phone is going off…

*

Oh wait, that’s just a toddler cry in the arena I call mi casa.

Gotta run.

Laced

Once upon a very long time ago, my sister and I were inspired by some strappy sandals we saw somewhere; who knows where anymore.  I’m talking like ten years ago.  But, we were inspired and we had to have some, but for some reason we wanted to make our own (probably because the real deals were out of our college student budgets).  So we set out for the perfect shoe to refashion.  I remember it took us awhile.  We both always had our eyes peeled and then one day, while we were strolling the aisles of our local Old Navy, we found the perfect sandals to use and they were on clearance (for $8, if I remember correctly).  We snatched them up and got to work…but what I really mean is we snatched them up and Farrah got to work.  Anyway, enough with the vague talk. 

These were the sandals we bought, only this is after we started our project.

Before we started, they looked similar to these Old Navy sandals (currently on sale for $13!)…

…but had some sort of embellishment on the top that we removed.

So I’ve had these unfinished sandals tucked away for all these years and last week I finally pulled them back out to finish what we started.  And now I am scratching my head in wonder that we didn’t finish long ago because they’re amazing done!

 

Here’s how I made them and how you can too!

As you can see in the picture of the sandals Farrah and I found above, we clipped the straps so that they were about two inches long.
  

And then Farrah started sewing the unattached end to the attached end by folding it over and making a few stitches at the base of the strap, making sure to stitch through both ends. 

[Allow me to show you by continuing where we left off.]

She got half of my straps done (and probably none of her own because she’s selfless like that) so I finished stitching the other three down this week.  I’m not sure why we decided to fold down the strap so that the end was visible from the outside of the shoe but we probably should’ve folded them in so that they were less noticeable.  Excitement took our brain apparently.  Or maybe we just didn’t want that part rubbing against our feet.  Either way, in the name of consistency, I sewed the rest of them the same way.  Also, I should mention that when we cut the straps, we cut them at a diagonal so that when they were folded over, the end would run along the bottom of the shoe (look two photos up for a visual).  Make sense?  I hope so…

And that was that.  The shoes were ready for the fabric ribbon I made.

I had thee worst time choosing fabric for this project.  Too many options, too little time, and too many little hands grabbing whatever they could while I was looking.  I walked into JoAnn Fabrics that day hoping to find one fabric but walked out with two.  But that’s the great thing about these sandals – the options are endless! 

Here are the two I grabbed:

[left & right]
I only bought six inches of each fabric and only ended up paying $3.50 total (I don’t think either were on sale and I didn’t have a coupon).  First things first, I needed to straighten out the fabric.  The lady that cut the fabric for me was awesome.  She made sure to cut straight across the design.  Whoever had previously cut the fabric didn’t do that so I had one wonky side and one straight side.  So, I just trimmed off the jagged side; getting it nice and straight.


Then I cut each piece in half – two shoes; two ribbons.  I didn’t measure because I’m lazy pretty good at eyeballing.
 

Now it gets a little picture-happy.  I went full on with the details on how to make fabric ribbons, so if you’re not interested or you’d rather go the easy (smart?) route and use pre-made ribbon, you might want to scroll right on past.

I made two different types of ribbons, a pair with pointed ends and a pair with squared ends.  We’ll get the point-ended ones out of the way first because they’re a tad more difficult (but not hard!…you could totally do this!).

First, I grabbed a couple of large safety pins and pinned them to the middle of each end, just past the selvage.

Then I folded the entire length of my fabric in half; right sides together.
 

Next I sewed together my unfinished edges, making a curve at the start of my sewing.  This gave me my pointed ends.  The picture below illustrates what I mean when I say I made a curve.

The red represents my sewing.  Starting at the folded edge of the fabric and right under the selvage, I sewed a straight stitch that curved to the opposite side and down.  I made sure to backstitch at the start too to make sure my stitches stayed put.

So then I sewed about a foot down my ribbon, stopped, and backstitched.  Then I did the same curved stitch to the other end of the ribbon but this time sewed until I was about three inches from my previous stitch.  Then I stopped and backstitched.  Now I had a long tube of fabric with a hole in it that was about three inches wide.
  
This hole is critical in getting the fabric right-side out.

Before I went right-side out though, I trimmed the excess fabric off my curved ends with a pinking shears.  A regular scissors would work too; pinking shears just give a cut that will supposedly help prevent fraying. 

Next, I went to one end, found my safety pin, and started feeding it back through the fabric tube I had just sewn.  It’ll bring the end of the ribbon along with it.  This is is how I got my fabric right-side out.


I fed it through and pulled it out the small hole I left in the hem.
 

I did the same to the other end; fed the safety pin through until my fabric was right-side out.

Then I removed my pins and wiggled the pointed ends outward to get them as pointed as I could get them. 

The last thing I needed to do was sew the hole shut.  To do this I fold the unfinished hems of the hole in like this:

And then I went over those folds/the hole with a quick straight stitch.
 

Here it is closed:
 

I purposely made sure the hole was about a foot in from one end so that it would end up being wound up in the knot of the ribbon once it was on the shoe and on my foot.  In other words, not noticeable at all.

Now onto the square-ended ribbons.

First, I cut off the selvage on the ends.  I needed to turn my ends in and hem them later and I didn’t want the selvage showing.


Then I placed a safety pin in the middle of just one end.


Next I folded the entire piece of fabric in half length-wise and sewed straight stitch down the unfinished edge; no curve this time.  After I did that, I was left with one long tube of fabric, inside-out and open on both ends.

To get my fabric right-side out, I guided the safety pin through the fabric tube just like I did with the navy and white ribbons except that this time, it came out the end.  It has to come out the opposite end it’s pinned in so you have to push it all the way through the entire length of the tube.  Once it’s out, pulling the fabric right-side out is easy peasy.
 

So then I had two unfinished, square ends.
  

To finish them, I folded the end of the fabric inside of the tube just a little; enough to get a stitch across the end to hold everything in place.
 
[And also my kids woke up from their naps…all three of them.]
[Don’t mind the nail polish…or what’s left of it.]

Last, I sewed a straight stitch across the opening, making sure to backstitch at each end.
 

Here’s a picture of the first end I sewed shut.
It didn’t look the greatest because I should’ve started sewing on the end without the stitching over to the end with the stitching.  Because I didn’t, my fabric got stuck in my machine and made a little thread mess.  But, you get the picture of what I mean when I say I sewed the ends shut, right?
 
So, there you have it!  Do-it-yourself fabric ribbons, sashes, whatever you want to call them!

Of course you can always just grab some pre-made ribbon at your local fabric store and that would work just great too!  Or, you can cut up an old tee or something made of a no-fray jersey and get ribbons that way!  However you get them, I think you’ll agree that the options really are endless!  There is a way to pair these with most of your closet just by changing out the ribbon!  I actually stole some ribbon from another pair of shoes in my closet and tried those too!  They were a little shorter than my fabric ribbons so I tried tying a different way – through the front loop, back to the side loops, up over the top of my foot where they criss-crossed, and back around to tie behind my ankle.

With the shoes themselves at $8 and the ribbons coming in at $3.50, my total investment so far on these kicks is $11.50.  Uh-mazing.  :)

Here are a few ways I’ll wear them:
 


Oh!  I forgot to mention how COMFORTABLE they are!  I love going barefoot but since that’s not the most socially acceptable option these days, just having a soft strap of cloth holding my sole on is the next best thing.  My feet are loving it!

So anyway, as you might imagine, I have plans to make the girls some because how cute would they look on little feet? 

Too cute!

.           .           .

Apparently Old Navy makes great shoes and great shoes with lots of potential because I recently refashioned a couple of pairs for the girls too!  See them here.

Check ya lata!  

Old to the New Navy

We are back from the Mile High City and let me tell you, traveling with toddlers is no easy undertaking!  We spent two hours on a bus and two and half hours on a plane, both ways.  I won’t go into details on the crazy but let’s just say we’ve sworn off major travel for severalllll months until there’s a little more independence amongst the toddlers in the fam and, therefore, a little more sanity amongst the adults.  ;)

So, moving on…

I’ve been drooling over these K & Elphy sandals for the girls:
 
[image via K & Elphy]

But, at $56 a pair, they’re way out of the park when it comes to our tiny budget.

So, armed with a gift card I’ve had since Christmas, I bought a couple of pairs of these from Old Navy:

[image via Old Navy] 
With a 30% discount code, I got them for about $11 each.  The thing about them though is that, while they’re cute with the fabric flowers, I feel like they’re a little too top heavy and being that the flowers are very notneutral colors, I’d have a hard time pairing them with every outfit I bedeck the girls in.  So, I bought them with the intention to change things up a little. 

And change them I did…


  A little bit different than how they came packaged, right?  Improvisation at it’s finest.  When I can’t have the ones I really want, I get them in a slightly different way. 

I was 90% sure I could take the flowers off the sandals when ordering them since I removed the bows off these shoes last year pretty easily and I was right.  All I had to do was remove the stitches holding the flowers on using a seam ripper.

See the stitches?

The stitching around the outside of the bottom of the felt piece holding the flower on was the same color as the stitching along the faux leather sides of the t-strap (does that make any sense?) so I had to be really careful that what I was ripping was the flower stitching and not the actual stitching holding the shoe together.

One down, one to go:
 
The flowers will make some cute headbands or clips sometime in the future.  :)

After I had both flowers off, I measured the t-strap into six even sections and painted those sections starting with white.  I didn’t paint the very top of the t-strap, where it meets the top strap, for no reason other than just because.  I just stuck to painting inside the stitching on the strap.

When the white was dry, I went in and painted on the black.  I used regular acrylic paint so the paint dried pretty fast and I was able to get both shoes done in about 20 minutes.  Originally I was going to use puff paint so you wouldn’t be able to see the tiny holes left behind from the stitching but the paint filled them in pretty well and I’m really loving the matte finish of the acrylic so we’ll see how it holds up in the long run.  So far, so good!

I love how they turned out!  Anthony isn’t the biggest fan of them but I’m hoping they’ll grow on him.  :) 


(Side note:  Old Navy also has these sandals which, if you painted the front strap, would imitate the K & Elphy’s even more but I wasn’t sure if paint would stick to the patent faux leather so I went with the t-straps instead.)

I took the girls outside in the rain this morning to grab the ‘after’ pictures and caught more than I needed so it’s only makes sense to share them.  I don’t like black and white stripes at all apparently…



My bribe of “I’ll let you hold my umbrella” was a winner and they leapt out the door to do so. 


 

Oh and their scarves!  I debuted them to Instagram a couple of weeks ago but I might as well give the low down here since this is supposedly a DIY blog or something…  I found this long-sleeved tee on clearance (I found it for 70% off in-store but click the link to find it 50% off online!) at Target last month and knew it’d make great infinity scarves for the girls.  I grabbed the biggest size they had.  To get the scarves out of it, I first cut off the top portion by cutting off the bottom of the tee right under each armpit.  Then I cut the big square that gave me down the middle so I had two halves of the bottom of the tee. 


Placing the right sides of fabric together for each piece, I sewed the two cut sides together and that’s it!  You could totally do this with no-sew tape too – see this tutorial.  Since it’s cotton, I didn’t hem the top (the bottom was already hemmed since it was the bottom of the tee) because it won’t fray.



I’m kinda wishing I’d have gotten another for myself!  :)

.           .           .

I hope it’s nicer in your neck of the woods than it is in ours.  Our forecast shows nothing but rain and thunderstorms for the next five days and that just makes this moms cabin fever warning siren go off loud and clear.  The last time I took the kids out in the rain I lost my car keys so I’m going to pretend I learned from that mistake and stay inside the casa…until desperation plays devil’s advocate and I suddenly find myself and the kids wandering those dangerous-to-the-wallet aisles of Target…  ;)

Kisses to you and yours!  :*