Pillow Talk

Our living room has been highly neglected in the past few years.  It’s walls are pretty much bare with the exception of a cross and an off-center painting, the rugs I’ve had on the floor have always been too small for the space (until recently we walked on the one that I bought for Sebastian’s room…see pic below), the hand-me-down club chairs are a cranberry color that isn’t necessarily a bad color but just not what I’d like, the pillows are all mismatched…

I thought we’d get everything in order back when we turned our thirfted coffee table into an ottoman but then other things got the priority and so the mismatched room has sat and sat.  We did move the furniture around some time ago though, separating the sectional to allow for a play area in the back corner of the room.  It’s not my favorite set-up since separating a sectional basically means you have two funky looking sofas but, it’s the most functional set-up right now while the kids are little. 
  

All that is about to change though.  It really all started last year on Black Friday when I found an 8 x 10 rug at Old Time Pottery for $73 (on sale from $130 plus an extra 15% off).  Actually, I found three that day and brought each one home and Anthony and I settled on a colorful, pixelated one.  It wasn’t my favorite but, oh you should feel it!  It’s thee softest, cushiest, non-shag rug I’ve ever stepped foot on.  We don’t even need a rug pad to boost its comfort level, it’s that comfy.  But anyway, it really got the wheels turning on how I needed to decorate this room to incorporate the rug and I knew that that process would be a tough one.  The rug could easily look western-ish and that is the total opposite of what I want.  I want light, bright, and modern with a hint of eclectic and a dash of classic…okay, basically I’m just throwing out words to tell you I want anything but country and moody.  Our beige walls were the first to change a few weeks ago.  We painted them white (Delicate White by Olympic).  A Debbie Downer:  We purchased Olympic paint + primer to do the job as they had the color we liked the best but were sadly disappointed.  We ended up having to do two coats and didn’t have a drastic color change going on in the first place.  Boo.

The next update I made in the room was to the pillows.  I finally got around to whipping up some zippered pillow covers for the existing pillows and two more pillow forms I’ve had stored away for this room for months and months.  And, I love how they turned out! 

I used a golden yellow geometric fabric (found on clearance at Hancock Fabrics for $10/yard), a pin-striped fabric from Old Time Pottery ($5.99/yard), and this colorful Neo Toile ($18.95 and my splurge).  I got two pillows out of a little over a yard so in total I spent about $40 to make seven covers ($47 including the zippers).  All of the fabrics are medium-weight home decor fabrics with the exception of the geometric.  It’s a light-weight and was a little tougher to sew with.  I was a little nervous about incorporating the colorful Neo Toile (even thought I absolutely love the fabric!) because I thought it might clash with the rug but I think that after all is said and done in here, it’ll blend right in.  It’s the craziest I’ll get though; everything else will be nice and mellow.  :)

So, the pillows.  I started by cutting out two squares of fabric for each pillow cover.  I did this by laying a paper template I made over the fabric, making sure it was straight.  Then I used a heavy vase of flowers as a weight, holding the fabric and template in place and together while I cut around the template.
 
[Aren’t the flowers gorgeous?!  They were sent to me on my birthday last week from some sweet, sweet friends.]

Using a template helped me make sure all of my squares were the same exact size.

Side note:  My pillows measure 20 x 20 inches so I made a 20 x 20 template using a bunch of piece of scrap computer paper that I taped together (I couldn’t find any other paper around this casa that was wide enough for me to use one sheet).  I’ve read that, for the best pillow cover fit, you should make your covers one inch smaller than your form so that’s exactly what I did.  After sewing using a half-inch seam allowance on each side, each of my covers ended up being 19 x 19 finished.

In the past I’ve made envelope-enclosure pillow covers, which are great but this time I went with zippered covers (my second try at them – here’s the first) because I love how you can use an entire piece of pattern fabric on the front and back without having to worry about the envelope disrupting the pattern flow on the back.  I used this tutorial from Design Sponge.  I followed her directions word-for-word except for the last part of installing the zipper.  When you’re almost to the end of sewing on the second side of the zipper, if you started from the bottom of the zipper, you won’t be able to sew right up and past the zipper pull.  It’ll be in the way and since you’ve already sewn the other side of the zipper, you’ll have no way to get to it to unzip it out of the way because of the basting (baste?) stitches.  So, what I did was, about an inch before I reached the pull, I secured my straight stitch by backstitching and then I cut the thread.  Next, I removed my pillow cover from the sewing machine and ripped out the basting stitches.  Once all the stitches were gone, I unzipped the zipper a little ways past where I stopped on the second side and sewed that last inch or so of the second side of the zipper on, backstitching at the beginning and end of that small area of stitches.  You can sorta see what I’m trying to explain and the area I had to ‘patch’ in this close-up:
 
I don’t know a way around this but I know there must be one because I haven’t seen any store-bought pillow covers with the small patch I’ve had to insert.  If you know how to avoid it, please let me know!!

In the Design Sponge tutorial, she clips her corners once she finished (that makes your corners more pointed when your pillow cover is right-side-out) and calls it a day.  You can also finish hems by cutting them with a shearing scissors, which helps them to not fray.  I’ve sheared lots of finished hems with success but this time around, I thought I’d take things to the next level and get out my serger that’s been sitting alone in a closet for the past three years; me too intimated to take it out and try it.  But, thanks to the encouragement and help from one of my household sisters, Marina (seamstress EXTRAORDINAIRE…guys, she made her own wedding dress!), I now am a proud, not scared, owner of a serger!  I wish I had gotten it out long ago!



Just look at that things handiwork!

[The threads are all different colors because I didn’t change them after the initial threading – using different colors helps the threading process since it’s a little complicated (but totally doable and the worst part!) and involves four different threads.]
Having kids means messes and, even though we don’t allow food in the living room, messes still somehow sneak in so it is so important to me that I’m able to wash our pillow covers.  Now I know that because all the hems are serged, I can wash these babies a hundred times and it’s unlikely that they’ll fray and fall apart.

Let’s talk edges.  Because I only bought enough fabric for what I needed, I didn’t have the option of matching sides (this is especially apparent with the Neo Toile) which is totally not necessary but on many high-end pillows, you’ll see exactly centered designs and matching fronts and backs. 

With the geometric fabric, I tried as best I could to line up the top seam so that it didn’t look too disconnected.  In lining up the top seam though, I had no choice on what would happen on the bottom, zippered end.  It’s a little funky but my concerns are elsewhere.
 

With the Neo Toile, I had absolutely no say on where the seam would land and in the end, they don’t look half bad (or at least that’s what I’m telling myself).  ;)

With the pin-striped pillows, I just made sure the stripes lined up along the side seams and didn’t worry too much about the tops and bottoms.
  

I’m sorry I couldn’t write up a whole tutorial from start to finish but I scrambled to make these pillows during a few nap times so I didn’t take the time to take detailed pictures.  I thought I’d make it up to you by finding a good video tutorial I could share with you because I think they’re the most helpful when it comes to sewing and so I found this one by Sewing In a Straight Line that seemed to be the most helpful although I couldn’t find a super-detailed one that I thought a beginner could watch and get it.  Guess I’ll have to work on making my own one of these days.  :)

  

Next on the list, we have to deal with this issue that literally drives me crazy every time I prop up my footsies:
A pattern and color clash of interior designers’ nightmares that means we’ll be recovering the ottoman asap.  The rug looks a little darker in the above pic than in real life but even so, this is one relationship that’s not going to work.  I’m thinking a linen-esque gray or maybe a large-scale white and gray geometric (the rug has gray in it along with a gray edge-binding thread).  Originally I had my eyes set on this Portfolio fabric from OFS…

…but I ordered some swatches of it in two colors and I’m now thinking the two small-scale patterns might be too much.  What do you think?  I’m open to any and all suggestions!

I’ll be working on the living room little by little, actually I’m going wall by wall, and so I’ll share as I go but I’m also going to be working on a few other things here and there so I can’t promise a speedy reveal but it will get done and I’m so excited to get it there!  We’ve got lots of frames to hang, wall shelves to build, and (shhh…I haven’t announced this plan to Anthony yet) a possible mantel rebuild.  All while keep ourselves and the three toddlers alive, hence the turtle’s pace.  :)

What are you working on these days?  One thing or a few?

.           .           .

P.S.  Thank you for your sweet words and eagerness to hear the rest of our love story!  I’m so excited to type up more and to relive those moments via the blog! 

P.P.S.  It’s party time!  I’m linking these seven couch potatoes up with Ana’s Cabin Fever Creativity Link-Up!

Fan Fail

(First and foremost, if you’ve been reading my writings for some time now you probably know that I usually post on Saturdays.  I’m switching that pattern up on y’all though and am going to start posting on Mondays with a few posts sprinkled in between due to family scheduling around here.  So, look for me at week’s beginning from now on!)

I tried something that’s been on my to-do list for awhile this week – updating the ceiling fan in our master with some sort of DIY light kit.  Success wasn’t on my side this week though so I’m considering the whole project a semi-fail.  But, I’m going to blab about it anyway just so you know it’s not all sunshine and roses, perfection and bliss over here when it comes to showcasing completed projects.  :)

So, at the beginning of the week, this is what our fan looked like:
 
Blah.  Thank the heavens it’s brass and not shiny gold but…blah.

Well, a couple of months ago I found this lamp shade on clearance at a local gem, Old Time Pottery, for $6 and thought it had great bones and once I put my crafty pants on, would look great hanging from any one of the boring ceiling fans in our house.  (I actually hung a shade from the ceiling fan in the girls’ room and love it, so I knew it could work.)

The fabric however, had to go.  I could’ve just glued my new fabric right over the old but I was planning on using a white fabric that was a tad bit transparent and didn’t want the old fabric’s pattern showing through.  Also, as the old fabric was a darker color, it would’ve let less light through.  I removed it by running a seam ripper along the frame, bottom and top, in between the fabric and plastic lining. 
 

After that I was left with this:

The old fabric was glued to the plastic liner so all I did to remove that was gently pull.
 

Unfortunately, the plastic liner wasn’t as durable as I thought and when I first starting ripping at a corner, I tore it…boo.  Thankfully, the next step saved me…
 

The last change I made to the original shade was cutting it down a notch.  I simply made a bunch of marks two inches above the bottom (making sure I was cutting off the edge with the tear), drew a line, and cut.

And this is where things all went slightly downhill.  Before I started the reupholstering process, I wanted to make sure I had cut the shade down enough so I had Anthony hold it up to the fan for me.  It was then that I realized that with the  plastic being an off-white color and not white or clear, it looked a little dingy.  Had I planned on using a dark fabric for reupholstery it wouldn’t have mattered, but I wasn’t.  Dang.  To make a long story short, I searched Lowe’s, Home Depot, the internet, and finally some craft stores with zero luck.  The only stiff white or clear plastic I could find that was at least the 42 inches wide I needed it to be was on ebay for $49.99 a sheet.  Umm, “no thanks” said the chick.  “I’m cheep, cheep, cheep.”  So with the brainstorming help of a Hobby Lobby employee, I finally decided to see how a half yard of thick tablecloth vinyl would work.  Cost me $3.  What was there to lose, right?  Hmmm…

Back to work, I cut myself a piece of vinyl the same size as the original liner.

And then I cut out my fabric…both layers.

You see, I never make things easy for myself.  I used some leftover white lining fabric from our dining area valances on top of the clear vinyl but under the sheer portion of a patterned Target shower curtain I found at Dirt Cheap for $2.  I really liked the idea of the pattern on the shower curtain to be subtle, white on white, but ‘in yo face’ when the lights were on…you’ll see.

(Side note:  The next few pictures are bee ay dee.  Sorry.  They were taken after bedtime and under the soft-white (why do they call it soft white?  It’s yellowy/orange/ugly.) lighting of our dining room chandelier.)

So after cutting both layers of fabric a smidge larger than my vinyl (1/2 inch on all sides), I grabbed some spray adhesive (Loctite from Walmart) and first sprayed the vinyl, attached the lining fabric, then sprayed the sheer fabric, and attached it to the lining.  You have to be really careful when you’re laying the fabric down on your adhesive that 1) it’s straight and 2) there aren’t any air bubbles/folds.  If you’re using a pattern like me, you also have to make sure it’s straight…read, pain in the butt but so worth it.  After my fabric was securely attached to the vinyl, I used hot glue to attach both short ends of fabric before gluing the tops and bottoms to the frame.
 

This is where, if you make a shade from scratch for yourself, you’ll need an extra set of hands to hold the frame while you glue.  It’s also where you’d need a whole ‘nother set of hands to take pictures…we didn’t have that luxury so I hope my explanation suffices.

While Anthony held both frames and the fabric-covered vinyl was laid out across our dining room table, I started at one end and glued small sections at a time, top and bottom.  Anthony rolled the frames along as I went.  As for how I situated the fabric and vinyl, the frame was set on the very edge of the vinyl and the fabric was folded right over  it and glued to the vinyl on the inside of the shade.  See?

[Update:  And then she finds this forgotten iPhone shot which she promptly adds.]

Behold, the finished product:
 
But wait, I know what you’re thinking.  “It looks all wavy and stuff!"  I know, I almost cried.  So the vinyl wasn’t a great idea.  Because it’s not as stiff as real plastic, it rippled, therefore ruining my idea, therefore ruining my shade.  I tried to make sure it was nice and flat as we glued it to the frame but I guess it just wasn’t meant to be part of a lampshade. 

Here’s a closer look at the mess:

Howeverrrr, the ripples aren’t noticeable at all when the light is on.
 

And see what I was talking about with the subtle pattern?
It’s hard to capture via camera but it’s looks so cool in person.  :)

At this point I was annoyed/frustrated/felt like I just wasted a ton of precious time.  I didn’t even feel like starting Part II…but just because I had a naptime and a crazy hair the next day, I did, just for kicks.

The large shade was not made to be alone.  No.  It was made for a smaller shade to complete it.  Namely, this one:
It was a Dirt Cheap find that only cost me a few bucks.

It had a white plastic liner and instead of cutting a new vinyl one (my original intention but seeing how the first turned out…), I just used the same process to attach, remove, and reupholster it as I did the larger shade, minus replacing the liner. 

After that was all done, I grabbed a couple of twisty-ties and attached the middle bars of each shade to each other like so:

Except when I went to hang the shade I realized the light bulb was too big to fit in between the two crossbars.  Enter the sign for Wits End with this project.  Sheesh…what next?

String?  No.  Fishing line?  We don’t have any………..  Paper clips?  Yes!
 

TA-DA!!

Last, not wanting the view from below to be all wires and stuff, I cut out a piece of cardstock and stuck it to the bottom of the small shades frame with some sticky tack. 

Once again, I know, it’s much too small and not any easier on the eyes.  I just haven’t gotten the chance to cut a larger circle but I think that should solve that problem.

So, ripples and all, here’s the finished product.
 

I’m definitely not in love with it and it definitely looks “homemade”, something I try to stray far from when DIYing home decor but for now, I’m going to live with it until I get another dose of motivation to switch it up or fix the large shade…speaking of, anyone have any recommendations on where to find some plastic lining?

  

I’ll be back sometime this week with details on what I’m thinking of whipping up next for this sorry fan and lots of other DIY light kit ideas, including where I got the inspiration for this shade.  Stay tuned!  It’s gonna to be good!

Upholstering a Frame Mat

Remember the word art I whipped up for the twins nursery?  Well, I mentioned that the homemade mat I made using the existing cardboard backing looked a little shoddy around the inside edges and so one night while the twins were tucked away in their crib I reupholstered it to get a much nicer facade.

I used some leftover curtain lining I had laying around from our dining area valance project, some masking tape, a little craft glue, and a scissors.

First I cut out a rectangular piece slightly larger than my cardboard mat:

I didn’t worry about cutting the edges perfectly straight since they were going to be attached to the back of the cardboard and therefore unseen like so:To get a snug fit I secured the middle of each side first and worked my way to the corners.  I didn’t have to worry about getting perfect corners either because they’d be hidden under the frame.

Then I cut the excess fabric out of the middle:

And cut some diagonal lines at the corners so that I could again wrap the fabric around the back:

I then put a few droplets of craft glue where the fabric would be laying on the back (to keep it extra tight and secure since the inside edge would be seen) and taped it down the same way that I did the outer edge:

Finally, I put the whole shebang back together and hung it up revealing a much more polished reminder for our girls:

Never will I pay to have a custom mat made for an odd-sized frame while I’ve got some cardboard and fabric laying around!  Think of all the options too!  Colored and/or patterned fabric or even scrapbook paper would be fun to spice up any artwork or photograph!  Decorative edges or even matted shapes would be so cool too!  Anybody else feelin’ the excitement?!  Anybody else made their own mat?  Lay it on me!  I’d love to see!

.           .           .

I hope everyone has a great weekend!  I’m looking forward to catching up on some projects after a great week with family!  My two sisters, my niece, and my mom were all here for the week and we had so much fun sewing up a storm and loading up on sweets!  Now that they’re gone our house is too quiet and I’m really missing the extra hands, especially since Cecilia has gotten RSV and a double ear infection…boo.  Poor thing has to be attached to a gas mask every six hours and it breaks my heart.  It’s her first real sickness and I’m hoping the last for a long while.  On the plus side though, we’re now proud owners of a pink panda nebulizer!  How cute is that?!  :)

The Berr Chair: Be Seated

On to, potentially, the most important part of the chair...because what is a chair without a seat, right? 

When we reupholstered our dining room chairs, we were fortunate not to have to buy new foam as the existing stuff had held up pretty darn good and was still comfy on the tush.  This wasn't the case with the 'Berr Chair'.  When Anthony removed the old seat cover, the cushion was literally falling in pieces to the floor and scattering in the wind.  He joked that it was probably asbestos...joking hopefully being the key word.  Either way, he took the seat outside so as to not litter our living room with tiny pieces of old foam.  Here's the seat stripped clean of old pleather material, asbestos?, and tiny nails that were a pain in the patooshkie to get out.

On to the the foam.  I wanted the chair to be really comfortable so I opted for a high-density, 2 inch, pre-cut into a square foam that I got at JoAnn Fabrics for $7 using a coupon.  Using the serrated knife from our kitchen (you use what you got, right?) I held the foam together with the seat and zipped along each side to create the foam of the seat's dreams.

Side note:  I did this holding the seat edge I was cutting over the end of our fireplace ledge in case you were wondering how I managed to not destroy our floors.  Fireplace turned make-shift work bench...like I said, you use what you got.

The next part was the biggest learning experience for us as we tried to upholster the foam seat.  You see, the high-density foam is pretty darn firm and so it was hard to staple the fabric on to get a 'professional' look...read on. 

 First we made sure to spray the fabric with Scotch Gard (very smelly so I did it outside) and then I simply laid the seat foam-facing-fabric-wise, wrapped the fabric around and up, and Anthony stapled.  What did we get?  A square-edged seat that looked like a cardboard box wrapped up with pretty fabric.  Not what I was envisioning.  Unfortunately, I didn't take a picture.

Out came the staples and in came the scissors.  I ended up trimming off the top edge to made a diagonal edge in hopes that that would cure the problem.  Then, with Anthony's help, I knelt on the edge of the side of the seat while he stapled so that when the fabric attached and I 'un-knelt', it would be pulled really tight to give a rounded effect to the cushioning underneath.

All done!

Cute, comfy, rounded, and ready to be paired with the 'Berr Chair'! 

P.S.  If you guessed that we'd used this fabric, kudos to you!