DIY Light Kit Inspiration & How-To’s

There are lots of ways to update an old ceiling fan, spray paint being one of them.  Go on Pinterest and search “spray-painted ceiling fans” and I’m sure the inspiration will come flooding in.  If you’re not up to painting your fan though, you can always DIY/add to the light kit and make a big change, just like I did last week to the ceiling fan in our master.

Here’s how you could go about doing just that using a drum shade and/or it’s hardware.  First of all, let’s talk the type of light your fan has.  There are some fans that have multiple sources, like this one in our living room:fanideas 011

To add a shade to this kind of fan you’d need to unscrew the finial where you’ll just be left with the lights and a threaded rod. 

fanideas 014

 fanideas 013

If you simply slip a shade that’s made to fit onto a lamp harp, like the one below, over the rod and screw the finial back on, you’ll have a drummed fan in no time.  Oh, but don’t forget to take off the glass light covers; you won’t need them anymore.  If they’re as ugly as ours, you’ll be glad to see ‘em gone.

 fanideas 001

If you’re not a huge fan of how the shade and fan look underneath, you could add a fabric diffuser just like John and Sherry @ Young House Love did here.

You might also have a fan that has just one hanging bulb, like this one in the twin’s room:fanideas 003

To add to this type of fan you’ll need a lamp shade with a larger ring in the center of it’s center bars (I’m totally making all these part names up…), like this one:
 fanideas 005

All you have to do is slip your bulb into the ring and screw it into the socket.
 fanideas 006
Easy.

Shades like the one below would also work.  Target and Walmart sell shades with this type of hardware so your color and pattern options without having to reupholster are many.
 fanideas 007   


As far as customizing your added shade goes, there are endless options.  I soaked in some inspiration from West Elm and Anthropologie to give you ideas.  With these you’ll get a little glimpse of what goes on in this noggin’ of mine.  Look out, flying thoughts!

1)  Anthropologie's Two-Tiered Lamp Ensemble
photo 3
This is the shade I was inspired by in making the kit that fits over the fan in our master, except I flipped it upside down.  Read all about how to make yourself one here (but make sure you skip on the vinyl in exchange for stiffer plastic).

fan 032

2)  West Elm's Small Round Capiz Pendantphoto 5

Since the shade in our master didn’t turn out exactly how I had hoped, thanks to the flimsy vinyl, I’m thinking of trying this next.  To get this look you’ll just need the frames of a few different sizes of shades (3 maybe 4 shades…oh, and did I mention that thrift stores are the PERFECT places to find lamp shades of all sizes?!).  Attach them so that you have a plane of concentric circles to which you’ll tie strings of capiz shells (which you can DIY using wax paper – see Brenna’s tutorial) in varying lengths (longer in the middle, shorter on the outside).  You can attach the rings by gluing skewers across them or anything else you can think of.  You can also skip the concentric circles and get the same effect using just one shade frame by tying several lines of fishing string from the outside ring to the inside ring (the part that fits over the light bulb), and then tying your shells on the string.  AND, you don’t have to use shells, you can use beads, strings of ribbon, and even washers strung together to get a shade that looks like this one:

3)  West Elm's Melissa Joy Manning Chandelier
photo 4

Next up, 4)  Anthropologie's Turquoise Rivulets Chandelier
 photo 2
I love this one and think a dining room complete with a ceiling fan would be the perfect place to try it.  To get this look, you’d need the frames of two lamp shades, a larger one and a smaller one, strings of beads, and some small chain or string to attach the two frames.  To make it, attach the top frame of your larger shade to the bottom frame of your smaller shade with the chain or string…I’d say anywhere from 9 to 12 inches apart.  Then attach your strings of beads (make sure they’re longer than the distance between your two frames…I’d add six or so inches) to the larger frame and then to the smaller frame, getting that pretty curve at the bottom.

5)  Anthropologie's Feathered Chandelier
photo 1
Last but definitely not least, you could imitate this look by cutting the above feathered shape out of some cardstock, painting it gold, and gluing it to the top frame of a lamp shade, letting each piece hang.  Think of it like drawing a heart.  You fold your paper in half, draw your heart, and open it.  Except with the above design, you’d fold your cardstock, draw half a feather and maybe make some cut-outs, paint it if you desire, and attach it while it’s still slightly folded to your ring.  You’ll make however many you’d need to go all around your ring.  Or, if you’re really good at paper crafting, you can make the whole design by accordion-folding one piece of cardstock and making some snips.  Make sense?  That one’s a little hard to get from brain to paper…

.           .           .

One awesome thing about all of these ideas is that you can even create them if you’re renting!  All you have to do is keep the original light cover, slip it back on when you leave, and bang, it’s like you were never there.  Cost-wise, if you scout out thrift stores and get creative with supplies, you can definitely come in under the $20 mark when all is said and done!  :)

I’d love to know if anyone ever tries any of these ideas (snap a still and use hashtag #heybeanlook on Facebook or Instagram) or if you’ve come up with some of your own!  And if I’ve failed to explain a step well enough, shout it out and I’ll try and elaborate!

Have a great weekend!  I’ll be back Monday to show you what I’ve been painting!  :)

Fan Fail

(First and foremost, if you’ve been reading my writings for some time now you probably know that I usually post on Saturdays.  I’m switching that pattern up on y’all though and am going to start posting on Mondays with a few posts sprinkled in between due to family scheduling around here.  So, look for me at week’s beginning from now on!)

I tried something that’s been on my to-do list for awhile this week – updating the ceiling fan in our master with some sort of DIY light kit.  Success wasn’t on my side this week though so I’m considering the whole project a semi-fail.  But, I’m going to blab about it anyway just so you know it’s not all sunshine and roses, perfection and bliss over here when it comes to showcasing completed projects.  :)

So, at the beginning of the week, this is what our fan looked like:
fan 002 
Blah.  Thank the heavens it’s brass and not shiny gold but…blah.

Well, a couple of months ago I found this lamp shade on clearance at a local gem, Old Time Pottery, for $6 and thought it had great bones and once I put my crafty pants on, would look great hanging from any one of the boring ceiling fans in our house.  (I actually hung a shade from the ceiling fan in the girls’ room and love it, so I knew it could work.)
fan 001

The fabric however, had to go.  I could’ve just glued my new fabric right over the old but I was planning on using a white fabric that was a tad bit transparent and didn’t want the old fabric’s pattern showing through.  Also, as the old fabric was a darker color, it would’ve let less light through.  I removed it by running a seam ripper along the frame, bottom and top, in between the fabric and plastic lining. 
 fan 004

After that I was left with this: fan 005

The old fabric was glued to the plastic liner so all I did to remove that was gently pull.
 fan 007

Unfortunately, the plastic liner wasn’t as durable as I thought and when I first starting ripping at a corner, I tore it…boo.  Thankfully, the next step saved me…
 fan 008

The last change I made to the original shade was cutting it down a notch.  I simply made a bunch of marks two inches above the bottom (making sure I was cutting off the edge with the tear), drew a line, and cut.fan 009

And this is where things all went slightly downhill.  Before I started the reupholstering process, I wanted to make sure I had cut the shade down enough so I had Anthony hold it up to the fan for me.  It was then that I realized that with the  plastic being an off-white color and not white or clear, it looked a little dingy.  Had I planned on using a dark fabric for reupholstery it wouldn’t have mattered, but I wasn’t.  Dang.  To make a long story short, I searched Lowe’s, Home Depot, the internet, and finally some craft stores with zero luck.  The only stiff white or clear plastic I could find that was at least the 42 inches wide I needed it to be was on ebay for $49.99 a sheet.  Umm, “no thanks” said the chick.  “I’m cheep, cheep, cheep.”  So with the brainstorming help of a Hobby Lobby employee, I finally decided to see how a half yard of thick tablecloth vinyl would work.  Cost me $3.  What was there to lose, right?  Hmmm…

Back to work, I cut myself a piece of vinyl the same size as the original liner.
fan 011

And then I cut out my fabric…both layers.
fan 013

You see, I never make things easy for myself.  I used some leftover white lining fabric from our dining area valances on top of the clear vinyl but under the sheer portion of a patterned Target shower curtain I found at Dirt Cheap for $2.  I really liked the idea of the pattern on the shower curtain to be subtle, white on white, but ‘in yo face’ when the lights were on…you’ll see.

(Side note:  The next few pictures are bee ay dee.  Sorry.  They were taken after bedtime and under the soft-white (why do they call it soft white?  It’s yellowy/orange/ugly.) lighting of our dining room chandelier.)

fan 014

So after cutting both layers of fabric a smidge larger than my vinyl (1/2 inch on all sides), I grabbed some spray adhesive (Loctite from Walmart) and first sprayed the vinyl, attached the lining fabric, then sprayed the sheer fabric, and attached it to the lining.  You have to be really careful when you’re laying the fabric down on your adhesive that 1) it’s straight and 2) there aren’t any air bubbles/folds.  If you’re using a pattern like me, you also have to make sure it’s straight…read, pain in the butt but so worth it.  After my fabric was securely attached to the vinyl, I used hot glue to attach both short ends of fabric before gluing the tops and bottoms to the frame.
 fan 015

This is where, if you make a shade from scratch for yourself, you’ll need an extra set of hands to hold the frame while you glue.  It’s also where you’d need a whole ‘nother set of hands to take pictures…we didn’t have that luxury so I hope my explanation suffices.

While Anthony held both frames and the fabric-covered vinyl was laid out across our dining room table, I started at one end and glued small sections at a time, top and bottom.  Anthony rolled the frames along as I went.  As for how I situated the fabric and vinyl, the frame was set on the very edge of the vinyl and the fabric was folded right over  it and glued to the vinyl on the inside of the shade.  See?fan 016

[Update:  And then she finds this forgotten iPhone shot which she promptly adds.]
photo

Behold, the finished product:
 fan 018
But wait, I know what you’re thinking.  “It looks all wavy and stuff!"  I know, I almost cried.  So the vinyl wasn’t a great idea.  Because it’s not as stiff as real plastic, it rippled, therefore ruining my idea, therefore ruining my shade.  I tried to make sure it was nice and flat as we glued it to the frame but I guess it just wasn’t meant to be part of a lampshade. 

Here’s a closer look at the mess:
fan 019

Howeverrrr, the ripples aren’t noticeable at all when the light is on.
  fan 021

And see what I was talking about with the subtle pattern?fan 020
It’s hard to capture via camera but it’s looks so cool in person.  :)

At this point I was annoyed/frustrated/felt like I just wasted a ton of precious time.  I didn’t even feel like starting Part II…but just because I had a naptime and a crazy hair the next day, I did, just for kicks.

The large shade was not made to be alone.  No.  It was made for a smaller shade to complete it.  Namely, this one:fan 017
It was a Dirt Cheap find that only cost me a few bucks.

It had a white plastic liner and instead of cutting a new vinyl one (my original intention but seeing how the first turned out…), I just used the same process to attach, remove, and reupholster it as I did the larger shade, minus replacing the liner. 

After that was all done, I grabbed a couple of twisty-ties and attached the middle bars of each shade to each other like so: fan 022

Except when I went to hang the shade I realized the light bulb was too big to fit in between the two crossbars.  Enter the sign for Wits End with this project.  Sheesh…what next?

String?  No.  Fishing line?  We don’t have any………..  Paper clips?  Yes!
 fan 023

TA-DA!!
fan 025

Last, not wanting the view from below to be all wires and stuff, I cut out a piece of cardstock and stuck it to the bottom of the small shades frame with some sticky tack. 
fan 034
Once again, I know, it’s much too small and not any easier on the eyes.  I just haven’t gotten the chance to cut a larger circle but I think that should solve that problem.

So, ripples and all, here’s the finished product.
 fan 031

I’m definitely not in love with it and it definitely looks “homemade”, something I try to stray far from when DIYing home decor but for now, I’m going to live with it until I get another dose of motivation to switch it up or fix the large shade…speaking of, anyone have any recommendations on where to find some plastic lining?

fan 032  

I’ll be back sometime this week with details on what I’m thinking of whipping up next for this sorry fan and lots of other DIY light kit ideas, including where I got the inspiration for this shade.  Stay tuned!  It’s gonna to be good!

fan 030

Are You Making a Dalmatian Costume?

That’s what Anthony’s first words were to me one night last week right after walking in the door, home from work.  You see, I had this great plan awhile ago and only needed some white skinnies to hatch it.  After searching on the cheap, high and low, I finally found these babies at my local fave discount store, Dirt Cheap, for $4.  They’re Liz Lange for Target maternity jeans but as you can see, they’re a little baggy:

polkadotstoo 

But, after a little nipping and tucking, they’re perfect mediums for this DIY plan I’d been itching to try after stumbling upon and pinning this picture on Pinterest:
polkainspo 
[via Pinterest via ???]

Behold:
  polkadots 023

Here’s how it all dotted out >>>polkadots 004
[Not pictured:  a measuring tape and pencil for marking out your dots in case you want to.]

All of these things I had on hand – black acrylic paint, fabric medium from this polka-dotting venture, and a random measuring cup and lone plate, both used only for painting purposes.

The foam pouncers I purchase at Michael’s specifically for this project.  Using a 40% coupon (thank you Michael’s app), they added up to $3.  I used the pouncer on the top right for this project but am so excited about all the other sizes and their future potential (baby clothes, scarves, shoes, curtains, walls…the list goes on and on)!photo (3)

So, after gathering all the goods, I started out by making tiny X’s about every four inches across the front and back of my newly altered pants (check out my tutorial for turning wide leg/boot leg pants into skinnies here). polkadots 001
I wasn’t too picky about perfection here.  I just tried to get evenly spaced X’s as well as I could, knowing nobody but a crazy person would notice minor defects in my dotted pattern.  Honestly though, after dotting I realized I probably could’ve gotten away without the measuring and just eye-balled it.  Next time…

After the entire pattern was X-ed out, I stuffed the pants with some plastic bags to make sure paint didn’t seep through and onto the opposite side.  Wax paper would have worked but would’ve had to have been cut/folded to fit, a step I didn’t feel like doing…luh-azeee me.
polkadots 002

Next, I mixed my paint with the fabric medium (2 parts paint to 1 part f.m.), spread the mixture out on my plate, and dotted away.
polkadots 005 

I dotted the back of the pants first, let it dry for eight hours, and then dotted the front.  The next day I dotted the left side, waited another eight hours for drying, and then dotted the right side.

To set the paint, I went over the pants with an iron (iron to pants without anything in between) the day after I dotted the sides and then threw them into the dryer on max heat for extra setting.  And that’s that!  Half a dalmatian costume or snazzy, new pants – whatever floats your boat!

So yesterday, while the girls were clocking in their afternoon siesta, I played dress up to see how many outfits I could put together with my new polka-dots.  Turns out they’re pretty versatile!  Check it:   polka1 polka2 polka3
I noticed while I was editing pictures last night that I forgot all about accessories!  I’m not a huge accessory-wearer, mainly because I forget about them when I’m in the throes of throwing on an outfit before the twins tear apart my closet, but I am trying harder to add those little details.  :)

I added sources and prices just to prove my point (made in our About page) that you can have a cute wardrobe for not a lot of cash.  I shop a lot of clearance, thrift stores, and discount stores and while I don’t feel I’d fit right in to Vogue everyday, I definitely have found that I can achieve an Anthropologie/J. Crew look with just a bit of cash.

Anyway, the pants are fun, no?  I love that they’re maternity but I’ll probably have to make some non-maternity ones after baby boy makes his debut to ward off any withdrawal…

You know I will.  :)