That’s a Wrap

Today I just want you to tap into your memory store and think back to the year 2016…back to the post in which I introduced this new and improved dresser:

You can get all the details on its new paint job if you click here but if you want to go inside, keep reading.  I decided that adding some glam in the form of a gold dip wasn’t enough so I took it one step further and lined all of the drawers with some gold dotted wrapping paper by Sugar Paper that I found at Target for $6.  (PS, I found it in the Christmas section but I’m hoping it wasn’t just part of a Christmas collection so that anyone who wants to follow suit can go grab some!)


I’ll tell you all about it, the good and the bad, but first, let me tell you how hard Sugar Paper made this decision for me.  Their papers are gorgeous!   
 
I choose a gold dot because I thought it would appeal to more buyers since I was going to sell the dresser but, if it were my own dresser, I probably would’ve went with the black and gold feathers on the gray backgroud (which, btw, would look amazing in Grace’s dresser) and if I we were keeping the dresser for the girls, I would’ve went with the colorful striped paper on the right.  So fun you guys!  <3

But there will always be more dresser drawers to line I’m sure, so let’s move on to the how on the current ones.

Measuring

Before you line your drawers with whatever paper you’ve got, you’ll have to measure each drawer to figure out how much paper you’ll need.  Stating the obvious, I know.  You can grab the old ruler or tape measure and write down measurements or you can do it the easy way.  :)

The easy way consists of grabbing a few sheets of computer paper, scrap paper, and/or used coloring book paper and laying it all out inside the drawer so that it overlaps, thereby making a template.

Making sure the paper is covering every square inch of the bottom of the drawer, tape it all together along the seams.
If you have any drawers that are the same size, just make sure the template you just made fits inside all of them.  (I made this template inside the top drawer and hooray, it fit inside the next two drawers down too!) Chances are, it will fit just fine.  On the rare occasion that the drawers are a smidge different, just make another template.

So easy, right?

Next, place your template on the wrapping paper, trace, and cut it out.  (Note:  Turn your template upside down and trace it on the underside of the paper so that there are no pencil/marker marks on the top of the paper that might be seen.)
(It helps to place something semi-heavy on top of your template as you trace to keep it from shifting, hence the ink cartridge package.)

Template (if necessary for different-sized drawers), trace, cut and repeat until you have all of the pieces of paper needed.

Papering

As far as adhering the paper to your drawer, there are a few ways to do it.  For a more temporary lining, you can just use double-sided tape at six-or-so inch intervals around the perimeter of the drawer to stick it down.  Then simply pull it up when you want a change.  For a more durable lining, I used some satin modge podge I nabbed on clearance.  Nevermind the sponge brush though.  I took this picture before I started which was also before I realized how much I hate sponge brushes.  Just grab a small paintbrush instead.

Ok, here’s where things got a little dicey for me.  I’m just telling you so you know what NOT to do. 

DON’T brush the modge podge onto the entire bottom of the drawer and then proceed to lay down your template. 

It doesn’t matter how much painstaking effort you exert to lay out the paper so that there are no air bubbles and wrinkles, they will probably come.  Think they’ll disappear once everything dries?  Nope, think again.  And then hold back tears as you rip out and waste a beautiful piece of fairly expensive wrapping paper.

So maybe that’s a little dramatic but I can assure you, the frustration was real.

Now, let’s skip over to the greener grass.  Here’s what you SHOULD DO.

Before you even think about laying the paper into the drawer, grab some clear acrylic or laquer spray and spray the back of each piece of paper.  This will form a nice barrier between the modge podge and paper; the modge podge won’t saturate the paper causing it to get all soggy and wrinkly.
(Random note:  I used this Krylon clear acrylic I had on hand and look how *not*clear it sprayed!  It’s a couple of years old so maybe it yellows over time when kept in the can but I guess I was just glad I wasn’t using it to spray something I wanted a clear coat on!  I didn’t have much left in this can so I also used some clear spray laquer and that was still clear despite being a couple of years old too.  Moral of the story, buy the laquer instead of the acrylic.)

I sprayed all of my pieces of paper one-by-one and then set them out flat to dry.  Once they were all dry, I went back to lining the drawers.

First, I laid the piece of paper in the bottom of the drawer so that it was exactly where it needed it to be.  Then, to hold it in place, I grabbed the kids’ pencil box (because it was the closest thing) and set it on one half of the paper to hold the whole piece in place. 
Next, I folded one half of the paper over so that I could brush modge podge onto one half of the drawer bottom.
And then I slowly folded/rolled the paper back down over the modge podge from the middle to the far edge.  It helped to grab a washcloth and rub it as I went.

See?  No wrinkles!

Once that side was done, I moved the pencil box to the other side and repeated.

I wish I hand one more hand to catch a video of how I did this but with the washcloth, I just rubbed up and down across the paper as I was laying it down.


I let all of the papered drawers dry overnight and the next day, I went in and brushed a thin layer of modge podge over the top of each piece.  I was a little nervous that this would take away the shine of the gold so I held my breath but phew!…once the modge podge dried, the paper looked just like it did pre-modge podge.

I LOVE the added beauty the lined drawers bring to the dresser!
It was definitely worth the extra steps to use this paper.  It’s the perfect compliment to the dresser’s paint job!  If you’re not in the mood to deal with paper to line drawers, check out this post on how to line drawers with fabric!

Also, you might remember that behind the doors on each side of the dresser, there are a couple of shelves that I set storage baskets on.

I made paper templates and cut out wrapping paper to line the shelves with but then I decided against papering them.  I was too afraid that, when sliding in the baskets, the paper at the front edge of the shelf might catch on the basket being slid and rip. 

But then I had those rectangles of paper laying around.  I could’ve saved them to wrap small presents but instead I stuck one inside our to-do list frame…

…and the three others went into the three frames hanging in the living room, specifically because I thought they’d be pretty behind the wreaths I hung on each for Christmas.

Which brings me to a tangent…Christmas decor.  The weeks leading up to Christmas were super busy here so not much seasonal decorating happened here.  :(

The plans I had to make Gianna a stocking never happened.
And thankfully she’s too young to care this year anyway. 

The rest of the decor was quick and simple.

I had a hankering to hang wreaths on the picture frames mentioned above so I grabbed some faux garland from the dollar store, unwrapped it to ruffle it up a little, and then wrapped it back up into a wreath shape.

Then I grabbed some red glittery ribbon I also got at the dollar store and hung those wreaths.
I also used some of the leftover strips of paper to disguise this almost-empty candle as a vase:

I’ve still got a small piece left and I’m thinking I might wrap a book with it.  It’s really hard to toss pretty pieces of leftover paper, ya know?  Haha! 

Anyway, that’s my drawer plus wrapping paper experience.  Have you ever lined anything with wrapping paper or any other paper?  If so, how’d you come out in the wrinkle department?  Maybe it was just me or maybe you had the same problem.  And maybe you’ve never lined any drawers but are now eyeing all the dresser in the house.  I know I am.  ;) 

Happy New Year folks!  I hope it’s been a good one so far!

*post includes affiliate links

.           .           .

Gold-Dipped Dresser

Holy moly!  I’m about to type up what was a whole month of work – an hour here, two seconds there, half hour here – in one post.  I’m not sure if it feels like I’m cheating or just not giving this project justice but either way…

Remember this dresser?
Well, that’s how it looked when we first got it.

Set inside the twins’ nursery, I gave it a two-toned look and some new, spray-painted hardware:
And now, I look back on that two-tone decision and I think “what the heck was I thinking?”  The french provencial style of the dresser married to a more modern, two-tone look probably wasn’t the best idea I’ve ever had.  I mean, it didn’t look awful but it definitely wasn’t as pretty as I thought it was at the time.  It’s funny how your perceptions change, isn’t it?

Well anyway, it doesn’t look like that anymore.  I spent the last month turning it into this:
I was inspired by a picture of this gold-dipped dresser I saw on Pinterest (pin’s link is broken) months ago and vowed to dip this one someday and that someday, or should I say somedayS, finally came around.

Hardware Swap

Sometimes I get this wild hair to do something and I have to do it rightthisminute.  Those wild hairs have really been rare since having kids but last week told a different story.  After seeing John and Sherry’s amazing kitchen renovation, we needed new hardware on our kitchen cabinets….okay, wanted…wanted knew hardware.  I loved how they placed knobs on their upper cabinets and coordinating handles on their lower and our kitchen was begging for it.

So, last week I plucked that wild hair and replaced all of our hardware with new, more modern handles on the bottom cabinets and coordinating knobs on the top.

Our old pulls weren’t bad and truth be told, they were actually pretty nice as seen in these old pictures:


But, they were definitely a little more traditional than the new bar pulls I bought and I thought adding modern pulls would make our refurbished kitchen look a little more modern; not like the old kitchen it is that we set new appliances in and painted cabinets to make it look new.

Old on the left; new on the right:

Replacing the lower cabinet hardware was easy peasy.  All I had to do was remove the old and install the new in the same holes.  The uppers were a different story.  I had to remove the old pulls, fill in the holes they left behind, drill new knob holes, and then screw in the new knobs.  On top of all that though, I figured it was high time I touched up the paint on our cabinets.  After almost five years, there were a few places where the paint was chipped just from normal, everyday use.  It was a simple fix though.  I just washed down all of the cabinets (something that also needed to be done) and used a small artists’ paint brush and leftover paint to paint right over those small chips. 

Once everything was painted, I got to work filling and drilling for the knobs.  To fill the holes in, I used Bondo (purchased on Amazon because it was cheaper there than at Lowe’s) after seeing Chelsea use it to repair her dining chairs.  The stuff is great and perfect if you’re like me and want immediate results.  It dries super quick!  I filled the holes, sanded them down, and had them covered in paint in under a half hour.  The one thing I didn’t do though was pay attention to detail.  I replaced all of the hardware in sections over four days time and everytime I had a chance to get to work, it was a small chunk of time while the kids were playing or Gianna was taking a cat nap.  So, I rushed and I shouldn’t have because there are places where I didn’t spend enough time sanding the Bondo so that it was completely flush with the door and other places where I should’ve went back and added more, like on this door:
Can you see those two small indentations right where the old pulls were installed?  *sigh*  Lesson learned:  Don’t rush through a project.  I’ll probably go back over and sand or re-fill the next time our cabinets need a touch-up and thanfully, the imperfections aren’t all that noticeable but the fact remains, they are there and I shouldn’t have rushed.  My OCD self will suffer everytime she sees them…

Anyway, lets get to the best part of this little project.  It will end up costing me a few bucks or even be FREE!  How?  Well, because we’re going to sell the old hardware for what we paid for the new – just under $25 for 23 pieces.  The old hardware is still sold at our local Lowe’s for $3 a pop and we bought the new at a fantastic price from the same place I bought the hardware for the kids’ play kitchen – eBay!  The knobs cost us 99 cents a piece and the pulls were $1.39 a piece – a fraction of what you’ll find them at in your local hardware store.  And, we can attest to their quality.  They’re heavy, brushed metal pieces of hardware that I’m sure will last just as long as the ones in-store. 
    


If you have a hankering to replace hardware (or if you didn’t before, maybe you do now!), we highly recommend these! 


Maybe it’s just me enjoying the change, but it kind of amazing how much of a difference hardware can make in a space.  We have original-to-the-house, ugly pulls on our master bath cabinets and I can’t wait to swap those out for these too.  Of course there’s a whole laundry list of updates we want to do in there eventually so you’ll have to stay tuned for those.  ;)

On another note relating to bathroom hardware, do you think it should match what’s in your kitchen?  I’ve seen lots of HGTV remodels where they install the same throughout the house.  Or is it better that it just coordinates?  Or maybe it doesn’t really matter at all and they can all be different and as long as they go with the rest of the decor in that particular room.  What say you fine readers?  I’m kind of asking because we were thinking of grabbing matching pulls for our bathroom, but in brass since a lot of the fixtures might be heading down the brass route.  Should we stick with the same or go different?  Of course this will all be happening months from now but it’s never too early to get a head start with plans, right?  :)

TGIF!

.           .           .

P.S.  I’m sorry this isn’t more of a tutorial!  We’ve been slowly tackling a lot of boring things around here like hemming Anthony’s pants, fixing broken toys and books, and doing an entire house purge so I didn’t have a lot of time to document this whole process while it was happening.  Let me know if you have any questions and I’ll be sure to answer them!

*affiliate links included in post*

Painted Sneaks

Whew!  What a week, huh guys?  I’ve been staying away from social media and focusing all my nervous energy on doing things like swapping out our kitchen cabinet pulls with knobs, a very spontaneous decision, and letting the girls paint their new kicks. 

They both started complaining last week, while wearing their old sneakers, that their feet hurt.  Maybe it was because, when I checked out the situation, their toes were stuffed into their now-too-small sneaks and needed a tad more space.  (Seriously?  Didn’t I just buy those yesterday?!)  So, to Walmart we went where we grabbed the same sneakers as the ones they had that had lasted us several months.  You can’t beat the price at $5.67 each and really, they hold up so well!  I really loved these tennies too but they didn’t have them in the girls size at the store and I didn’t feel like waiting for them to be shipped so we went another route – plain white with a project in mind.

I had to push my fear of messes aside to set out all of my (very permanent) paints so that the girls could get their customization on.

First, I removed all of the shoelaces.
(And speaking of the shoelaces, the girls don’t know how to tie their laces yet so I’m thinking about grabbing some of these laces!  They look so cool and would make getting out the door without having to bend over (twice) so much easier!)

Then I stuffed the insides of the shoes with plastic bags so that paint didn’t get inside and also because they kept the sides from collapsing in while the girls painted.

I wrote in this instagram that I let the girls “go to town” on their new shoes and maybe that was a little misleading because I didn’t just hand over the paint and walk away.  I did a little bit of what’s called micro-managing.  :)  Gianna and Sebastian were both sawing logs so I had two free hands to help, clean-up, whatever.  Part of that micro-mamaging was only letting them do one color at a time.  They wanted “rainbow” shoes and we’re still working on the concept of color-combining.  They have a hard time understanding how you get brown when you mix ALL the colors instead of rainbow… 

I asked them to try not to get paint on the rubber soles.  I knew that the paint would end up peeling off of the rubber and so I just figured we could skip that part.  They did pretty good staying off the rubber and the little bits that they did paint, I could scratch right off.

I also told them that they could paint them however they wanted – stripes, polka dots, zebra, whatever.  And I told them that they could paint them differently than their sister was.  Haha!  They tend to start coloring differently and then, once they see how their sister is handling the crayon, they do the same.  I wanted their shoes to be totally different 1) because I was interested to see what each’s idea of painted shoes looked like and 2) so I could tell whose was whose without asking (even though I did mark their initials on the bottom soles just to be safe…not that they can’t share shoes but more so they won’t forget which they painted and fight over them ).

I thought about grabbing some NeverWet to spray them with so they’d stay cleaner longer but I haven’t had a chance to grab some.  By the time I do, their little feet will probably be begging for the next size up and since this paint-fest went so well, we might have to repeat it later.

Next time, maybe I’ll grab a pair of my own and join in!  Anybody else?  :)

.           .           .

*affiliate links included in post*

Trophy (Painting) Wife

Last week, I finally got around to throwing up a collage wall and making a lamp out of string lights in Sebastian’s room.  If you missed that post, go check it out.

A few of the things up on that wall are some trophies from Anthony’s years past – Little League baseball years past.  I asked him a few years ago if he’d allow me to spray paint them and I got a shocked face and a stern, are-you-crazy, “no”.  Then I tried again last week and, maybe since all these guys have been doing is chilling in Sebastian’s closet, I got a “sure”.  So, I took that affirmative and ran with it…straight outside…with a few cans of spray paint.

Have you a few old trophies laying around?  Maybe you’ve passed some by at your local thrift store?  Well, if so, here’s how to make them as exciting today as they once were.

Trophies are put together really simply.

Basically, they’re a bunch of pieces and parts stacked on top of eachother with a long, threaded rod down the middle and that rod is secured at the bottom with a nut.

Unscrew that nut and everything will just slide right off.

The super cool thing about Anthony’s trophies is that each base is marble, carrerra marble to be exact.  I know so because a tiny sticker on the back of each told me so.  So fancy, right?  Well, there’s no way I’m going to paint something that isn’t ugly in the first place.  So, I grabbed all the plastic to be painted and left the marble as-is.

I gave all of the pieces a good washing with some dish soap and a toothbrush before I painted them.  They were a tad dusty from being stored so long.  After they were dry, I took them outside and laid them all out on a big piece of posterboard that was headed for the trash.


Then I gave each piece a coat of spray primer.  Plastic tends to be pretty finicky when it comes to holding paint (ahem), so priming it first ups the chances of it really sticking.

I painted one side of each piece, let that side dry, and then turned everything over to paint the other side.

Two of the trophies I left just primed – the gray and white.  I wasn’t sure what color I wanted to go and the only actual color I have in my spray paint stash right now is yellow.

Once everything was nice and dry, I put the trophies back together the same way I took them apart – by stacking them in order over the rod and securing it all by putting that nut back on at the base.  Except, in putting them back together, I turned the marble bases around backwards so that the metal plate parts with all of the writing were facing the back and the fronts were just plain marble.  See?

(So I was thinking while I was putting these things back together, about how awesome it would be to grab a few marble-laden trophies from a thrift store, take them apart to remove the marble, and stack the marble pieces all together to make a lamp base.  You could put all the big pieces at the bottom and small at the top or you could stagger them so they’re all different.  Either way, it be a really cool and cheap way to get a marble lamp!  :D  )

Had I a longer shelf, I probably would’ve painted more trophies and maybe that’ll eventually happen anyway.  Until then though, I really love how these turned out.  It’s fun when you can redo and repurpose something but even more fun and special when it’s something of sentimental value that probably wouldn’t have been used much less displayed anyway.  :)


All thanks and gratitude to my trophy husband for being so good at baseball as a wee lad, for without his mad skills (and eventual reluctance to my painting idea), this post would probably never have been written.  :)

.           .           .