Anthro-Inspired Knobs

>>> DON’T FORGET TO ENTER OUR CRAFTING TOOL GIVEAWAY!  TODAY IS THE VERY LAST DAY!  THE LUCKY WINNER WILL BE ANNOUNCED TOMORROW!  <<<

We put knobs on the cabinets in our laundry room.  A boring woo-hoo, right?  knobb4nafter
[Left was then; right is now…just to clarify in case the change is too teensy to notice.]

But hold up, they’re not just any knobs.  Nope.  They’re knock-offs inspired by Anthropologie that I spent a small sliver of everyday last week crafting.

knobgraphic 
Theirs are just to-die-for/swoon/can-I-marry-them gorgeous, aren’t they?  The $14 price tag, not so much.  Had we purchased these for our laundry room, our back account would’ve been set back a hefty $84 (six knobs) not including tax and shipping.  Mine cost me $3.  Bean for the win!

Here’s what they looked like before I got all snazzy on ‘em:  knobs 001
I have actually been wanting to put some knobs on those cabinets for some time because they just get so finger-printed and dirty so I headed out to our local ReStore one day awhile ago and snatched up six of these shiny gold knobs.  I could’ve gone gold with them to get Anthropologie’s look even more, and boy did I want to, but I  just didn’t want the gold to clash with the big chrome rings on our washer and dryer.  I mean, I’m all about mixing metals but this is one time I went matching.  So, silver they became.  

My first step was covering up the gold and getting them all nice and prepped for paint with a few coats of white primer (Rustoleum).
knobs 031
I made sure to leave the screws in the back to keep the paint from getting in and clogging up the hole back there.

Once they were nice and dry, I flipped them onto their faces since I didn’t need silver paint there and sprayed the stems and backs with some Rustoleum silver metallic spray paint.knobs 032
I used the chrome silver, not the brushed silver, but I’ve found that there’s really not that much of a difference between the two.  The chrome is unfortunately not as chrome as the cap of the can would have you believe.  :( 

So after the silver was even and dry, I taped off the faces of each knob and took them back outside where I sprayed them with some plain white spray paint (Rustoleum…again).knobs 002

After I sprayed the faces white, I let them dry and made sure to leave the tape on (usually I’d take it off right away to prevent peeling but since the coat of white was so thin, I had no problem with it) because next up was…
knobs 003 
Yep, nail polish!  After a search through the Martha Stewart specialty paint at Home Depot left me hanging for pearl paint, I did some brainstorming and dug through my polish where I found this pearl color by NailSlicks.  I’ve never used nail polish in DIY and I wasn’t sure if it’d work but there’s a first time for everything, right?

Well, it worked and it worked well.  Here are the knobs after I painted their faces with my pearl nail polish: knobs 008
It’s a little hard to see in the above picture (I was lazy and used my iPhone for pictures) but they’re not perfect; the coat isn’t smooth and even.  But, that’s exactly what I needed considering the pearl on the Anthropologie knobs is laid in squares and not one smooth layer.  The nail polish was a little difficult to paint as it dried quick, making my desire for the imperfection in it all a little easier actually.  All I did was paint diagonal lines out from the center of each knob.  Here’s a closer look:
knobs 007
Also, I took the tape off each knob as I went because I was afraid, had I left all the tape on until I was done, it’d take the thicker nail polish layer off with it.

Next up, the design.  First I made myself a little stencil…I’m no good at drawing perfect shapes freehand.  Oh no, give me a roller and I’ll paint big Ws on a wall but perfect circles and squares you will not get.  Plus, from here on out there were to be no mess-ups or all would be lost.
  So, I actually just traced the design from the Anthro knob from computer screen to a small piece of wax paper, cut it out, centered it over my knob, and traced it on very lightly with a pencil. 
knobs 028

Then I used a silver sharpie (which I made sure matched the color of the spray paint before I started) to permanently draw on my design. 
knobs 030

Here they are, all designed!!knobs 036

Last, I spray each knob with several coats of the same spray lacquer I used on the knobs in the girls’ room to give them a nice glossy finish.  This part was a little disappointing.  I found that the lacquer dulled the silver a little and really didn’t even make it that glossy.  The faces of each knob were a little glossier after finished but not what I had in mind.  Either way, the knobs had a nice coat of protection and were ready for use.

knobs 017
So pretty, no?
knobs 018 

Back-tracking a little here…to figure out where I wanted the knobs placed on each door, I googled “where to install knobs on cabinets” and got my friend Lauren to send me a picture of the knobs in their kitchen.  The general consensus was that the edges should be 1/4 to 1/2 inch away from the edges of the door.  After I did some measuring and marking, I cut out some circles the same size as my knobs from a piece of paper and stuck them on the cabinets to see the placement before the holes were drilled.  Fake paper knobs:
knobs 035
Later, after all the knobs were ready to be up and functioning and I was happy with their future placement after staring at the fake paper knobs for a few days, my main man got out his drill and drilled six holes.  And that was that.

knobs 023    

So, in the end I only shoveled picked out $3 for this entire project because I had everything on hand but the knobs.  If you had to buy everything for this project (somebody puh-lease make them in gold…pllllease!!), you’re looking at around $20+ (primer, silver, and white spray paint, tape, pearl nail polish or some sort of pearl paint, a silver sharpie, tape, and thrifted knobs) but you’ll have loads of supplies left over at the end to be used for other things.  So, when all is said and done, it’s a pretty cheap project…especially when you think about how much you’re saving by making your own version vs. buying the real things.  :)

knobs 020


So, anybody else DIY-ed some knobs out there?  What about knocked-off an Anthropologie or upscale object/design to save some cash but still get the look?  Or maybe you just save up/splurge for the real thing?  Either way, it’s fun to get some character up in herrr, no?

.           .           .

Someone say party?!  Yep, I’m cruisin’ in from March 2014 and linking up with East Coast Creative for their week of knock-offs!  Click over to see some pretty amazing knock-offs!

4 comments

  1. This isn't DIY, but I love Anthro's (well, everything, but-) hooks and really wanted them for our kitchen. I ended up finding very similar ones at World Market for so much cheaper!

    ReplyDelete
  2. And I love the ones you made! Great idea!

    ReplyDelete
  3. Sheena, for future knob needs when you don't have time to craft, check out World Market. We found IDENTICAL knobs to ones at anthropologie but for a fraction of the price. They weren't 50 cents, but they were still a great deal. Anyway, keep crafting!

    ReplyDelete